There are 10 battery state of charge LED’s and three battery care LED’s. State of Charge is displayed by the arched 10 LED percentage meter.
The three battery care LED’s on the left side will indicate the following conditions:
- The top green LED will light up when the batteries have received a “full charge” within the last week.
- The centre amber LED will light up if the batteries have not been fully charged for one week.
- The bottom red LED shows that the batteries have not been charged for two weeks or more.
|Battery Voltage (auto select)||12v, 24v, 36v, 48v|
|Battery Types Supported||Gel, AGM, Flooded Lead Acid|
|Maximum Input Voltage (reverse polarity protected)||70 vdc|
|Average Power Draw||12.5 mA|
|Physical Size||4.75″ x 3.76″ x 0.85″|
|Lead Wire Size||9′ 10″, 22 AWG|