Conext 60A MPPT Solar Charge Controller

ID: 865-1030-1

$899.00

Schneider Electric

The ConextTM MPPT 60 150 is a photovoltaic (PV) charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries.

Downloads

Description

MPPT multi-stage charging, better battery life

The ConextTM MPPT 60 150 is a photovoltaic (PV) charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the MPPT 60 150 regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.

Why choose Conext MPPT 60 150

Higher return on investment

  • Maximum Power Point Tracking (MPPT) algorithm continually seeks the maximum power available from the PV array
  • Improve battery life with selectable multi-stage temperature compensated charging
  • Five-year standard warranty

Flexible

  • Stand-alone application or full integration with Conext XW and Conext SW inverter charger system
  • Compatible with any brand of PV Module
  • Available remote monitoring and configuration

Easy to install

  • Configurable auxiliary output
  • LCD screen with face plate buttons for configuration and system monitoring
  • Integrated PV ground fault protection for negative grounded arrays
Solar Controller Specifications
Nominal Battery Voltage 12, 24, 36 or 48 volts DC
Minimum Battery Voltage 0 V (DC)
Battery Voltage Range 0 Vdc to 80 Vdc
Nominal Solar Input Voltage 140 V (DC)
Max Solar Input Voltage 150 V including temperature correction factor
Rated Solar Input Current 60 A (48 A @ STC)
Max Solar Input Current 60 A (for all battery voltages except 60 V)
Max Output Current 3500 W
Peak Efficiency 93% (nominal 12 V), 96% (nominal 24 V), 97% (nominal 36 V), 98% (nominal 48 V), 99% (nominal 60 V)
Standby Power Consumption 2.5 Watts (nighttime)
Status Display LCD, 2 lines 16 digits
Charger Regulation Three-stage (bulk, absorption, float) plus manual equalization
Environmental Rating Indoor, ventilated, sheet metal chassis with 2.2 cm and 2.8 cm (7/8 in and 1 in) knockouts and aluminum heat-sink IP20
Temperature Comp Included
Remote Optional XW-SCP (865-1050)
Maximum Wire Size #6 AWG to #14 AWG (10 to 2.5 mm²)

Reviews

There are no reviews yet.

Be the first to review “Conext 60A MPPT Solar Charge Controller”