Tamarack 25″ Single Panel SOP Mount

ID: UNI-SP/01

$125.00

Tamarack Solar

Tamarack Solar Side of Pole Mounts support pole diameters of 2″ to 4″ (2.375″ OD to 4.5″ OD) and modules with center-center distribution of 19″ to 39″. Side of Pole Mounts are manufactured using heavy-duty corrosion-resistant 5000 series aluminum and stainless steel hardware. These mounts can also be lag bolted to wooden structures and telephone poles that exceed the 4″ pipe diameter. Schedule 40 pipe is not included. 10-year warranty on structure and 3-year warranty on finishes.

Downloads

Out of stock

Description

Side of pole mount for a single solar panel. The UNI-SP/01 mounts easily to poles 2″ to 4.5″ in diameter, supports modules up to 25 inches in width and a tilt range of 15 to 65 degrees. These units are manufactured using heavy-duty corrosion-resistant 5052-H32 aluminum.

Note: Schedule 40 pipe not included.

Features

  • Supports a single PV panel up to 25 inches in width
  • 26.9″ ± 5″ max distance between module mounting holes (height direction)
  • Supports pole diameters from 2″ to 4.5″
  • Easy tilt solar panel adjustment ensures optimal alignment in a range of environments, year around
  • Heavy-duty, corrosion-resistant aluminum means long-term reliability and value
  • Compatible with most commercially available solar panels
  • Easy installation and affordable pricing help slash total cost of installation

Side of Pole part number selection is based on three criteria:

  1. The number of modules, and
  2. The maximum total width of the module(s), and
  3. The distance between the inside mounting holes

Model  # of Modules   Max Total Width    Distance Limit between
Inside Mounting Holes
 Pole Diameter 
 UNI-SP/01 1 Up to 25″ 26 9/10″ 2″ – 4.5″
 UNI-SP/01A 1 Up to 27.5″ 26 9/10″ 2″ – 4.5″
 UNI-SP/01XH 1 Up to 27.5″ 37 1/8″ 2″ – 4.5″
 UNI-SP/01XX 1 37 1/8″ 2″ – 4.5″
 UNI-SP/02 2 Up to 45″ 26 9/10″ 2″ – 4.5″
 UNI-SP/02A* 2 Up to 55″ 26 7/8″ 3″ – 4.5″
 UNI-SP/02X* 2 Up to 55″ 37 1/8″ 3″ – 4.5″
 UNI-SP/03 3 Up to 70″ 4″ – 4.5″
 UNI-SP/03W 1 Up to 40″ N/A 4″ – 4.5″

* The only difference between the “A” version and the “X” version is that the X version has a longer bucket – meaning it will hold longer panels. The bucket on the X version is 35.6″ and on the A version is 25.5″. If the distance between the mounting holes of the module is closer to 35.6″, use the X. If it’s closer to 25.5″, use the A.

Reviews

There are no reviews yet.

Be the first to review “Tamarack 25″ Single Panel SOP Mount”