Victron 15A 75VDC BlueSolar MPPT Charge Controller

ID: BLUESOLAR MPPT 75/15

$149.15

Victron Energy
  • Bluetooth enabled (Bluetooth dongle needed)
  • Day/night timing and light dimming option
  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • BatteryLife: intelligent battery management
  • Load Output

Downloads

Description

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.  Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.

The load output is short circuit proof.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.

Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm
See the software section on Victron Energy website for details

Day/night timing and light dimming option
See the software section on Victron Energy website for details

Programming, real-time data and history display options

  • Modern Apple and Android smartphones, tablets, macbooks and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots.
  • ColorControl panel
Solar Controller Specifications
Nominal Battery Voltage 12/24V Auto Select
Nominal Solar Input Voltage Battery Voltage + 5V
Max Solar Input Voltage 75V
Max Solar Input Current 20 A
Max Output Current 15 A
Peak Efficiency 98 %
Operating Consumption 10 mA
Rated Load Current 15 A
Environmental Rating P43 (electronic components), IP22 (connection area)
Temperature Comp -16 mV / °C resp. - 32 mV / °C
Remote VE.Direct
Maximum Wire Size 6 mm² / 10 AWG

Reviews

There are no reviews yet.

Be the first to review “Victron 15A 75VDC BlueSolar MPPT Charge Controller”

SKU: BLUESOLAR MPPT 75/15 Category: Tags: , , Brand: